log2timeline 사용 예제

Using Log2Timeline

Log2Timeline and forensic timeline creation


Creating timeline w/mmls, fls, log2timeline
This is really written with an image of a Windows system in mind. This was written as a guide for our lab (and me, to help remember), so keep in mind it's not necessarily intended to be a polished presentation. Some things were added/changed as my use of l2t progressed. The big difference between this and what has been published on the SANS blog and on Kristinn Gudjonsson's site is the use of 'find' and 'while' loops to recurse through directory structure instead of (for instance) going into each user profile for the ntuser.dat file. 

These l2t cli bits of this are largely irrelevant now, with the introduction of the timescanner front-end (which does a great job of automating everything for you). However, there may (hopefully) be some other things of interest/use in different scenarios.

You do not have to extract the partition, but it's helpful to have a single image file for mounting purposes (I'm not sure about mounting a split image; at the least it will be easier to have a single/concatenated file)...

NOTE: Where something is enclosed such as [imagename] this includes full path to that file where needed; the "name" is a variable assigned by the analyst.

You need to gather partition info, which can be done with mmls or fdisk:

mmls [imagename] - this will show partition info (even from split image files), and you can identify whichever partition(s) you need (specifically you need the start point).
or
fdisk -ul [imagename]

To create the baseline bodyfile, use the following:
fls -m [original mountpoint, ie C:, /boot, etc] -r -f [file system type, type 'fls -f list' to find the values] -i raw -o [offset/start sector info from mmls] [path to imagefile] > [path to new bodyfile]
NOTE: The offset here is the straight info provided by mmls; it is not multiplied by 512 (sector info)

Variables here are: 
C: - this is however you want it to show in the bodyfile for drive letter; keep in mind if you are working multiple partitions... (-m is what allows you to set this parameter)
ntfs - this will depend on the file system in question (-f denotes you will provide filesystem)
raw - this will depend on the image type (-i denotes you will provide image type)
offset info - as stated, this comes from mmls or fdisk (-o denotes you will provide offset)
recursive - this is denoted by (-r) which says you are recursing into all subdirectories

Bodyfiles are converted to timeline format w/mactime command (you don't do this now; it will happen at the end):
mactime -b [bodyfile] -d -m -y -z [timezone] 2000-01-31..2000-02-01 > [timelinefile]
Variables here are:
-m and -y: go together to establish date format - yyyy mm dd and day of week
-z: sets the timezone of the original system/image
-b: you will define the bodyfile to be used
-d: provides output in CSV format (this will add the timestamp to every line, even if it's the same second - you need this!)
dates: date range provided in yyyy-mm-dd..yyyy-mm-dd format - must use both, even for single day (in which case, the 2nd date MUST be one full day after) such as:2009-11-10..2009-11-11
NOTE: For original/main bodyfile, you won't use the date parameters; you want the entire system bodyfile intact (you will split out later if needed) 
NOTE: There are some cases where you are having to process multiple bodyfiles into a single timelinefile, and want to use >> to append instead of overwrite. Be careful!

Creating log2timeline bodyfiles:
You can use the following to get lists of l2t variables/parameters:
log2timeline -f list

First you must mount the imageset loopback to be able to browse the filesystem for use w/l2t:
Multiply the Offset info (from mmls or fdisk) by the number of bytes per sector (also from mmls or fdisk), typically 512 (such as 63*512=32256)
mount -o ro,loop,offset=32256 -t auto [imagename] [mount point]
Variables here are:
offset: this will depend on the result of your partition math, as noted above

NOTE: I use mkdir to create my mountpoint, using things like "src" for source and "dst" for destination instead of relying on drive lettering (such as sdc1)

Now you can browse the mounted filesystem for your imageset, in order to create bodyfiles for l2t...

cd to any relevant profile, for ntuser.dat files
log2timeline -f userassist NTUser.dat > [UAbodyfile]
or from within Documents & Settings, do:
find . -iname ntuser.dat | while read d; do log2timeline -f userassist "$d" >> [UAbodyfile]; done ****This works better - more automated****

while within profile, run LNK files (if there are multiple users, do so within Documents & Settings):
find . -iname *.lnk | while read d; do log2timeline -f win_link "$d" >> [LNKbodyfile]; done

while within profile, run IE history (if there are multiple users, do so within Documents & Settings):
find . -iname index.dat | while read d; do log2timeline -f iehistory "$d" >> [IEbodyfile]; done

while within profile, run Firefox 3 history drill down into Application Data/Mozilla/Firefox/Profiles/xxxxxxxx.default and do:
log2timeline -f firefox3 places.sqlite > [FFbodyfile]
or from within Documents & Settings, do:
find . -iname places.sqlite | while read d; do log2timeline -f firefox3 "$d" >> [FFbodyfile]; done ****This works better - more automated****

cd to Recycler directory, and down into each S-1-5...
log2timeline -f recycler INFO2 > [RBbodyfile]
or from within RECYCLER directory, do:
find . -iname INFO2 | while read d; do log2timeline -f recycler "$d" >> [RBbodyfile]; done ****This works better - more automated****

cd to System Volume Information/_Restore/RP... for restore point info (you do not have to go into each subfolder)
log2timeline -f restore . >> [RPbodyfile]

cd to Windows/Prefetch directory for prefetch info
log2timeline -f prefetch . >> [PFbodyfile]

With all of your individual pieces, create a copy of your original system bodyfile, and add the l2t bodyfiles into it:
cp [bodyfile] [bodyfile2]
cat [XXbodyfile] >> [bodyfile2]
Repeat for each l2t bodyfile (denoted by the "XXbodyfile")

You now have a single bodyfile which contains all the l2t variables/optional bodyfile info. This is the point you will start splitting out timeline sections with date ranges:
mactime -b [bodyfile] -d -m -y -z [timezone] 2000-01-31..2000-02-01 > [timelinefile]